Troubleshooting Guide: Your Whirlpool Side-by-Side Refrigerator Not Cooling – What to Do Next

Is your Whirlpool side-by-side refrigerator failing to maintain its optimal cooling temperature, leaving you with worries about your food spoiling? This troubleshooting guide is tailored to help you navigate through the common issues that may be causing your refrigerator to not cool properly. As a vital household appliance, a malfunctioning refrigerator can disrupt your daily routine and lead to unnecessary stress.

By following this comprehensive guide, you will be equipped with practical steps to diagnose the problem accurately and effectively resolve the cooling issues. Don’t let a malfunctioning refrigerator hinder your household’s comfort and convenience any longer. Take charge of the situation and explore the solutions presented in this guide to get your Whirlpool side-by-side refrigerator back to its efficient cooling performance.

Key Takeaways
There could be several reasons why your Whirlpool side-by-side refrigerator is not cooling. Check if the temperature settings are properly adjusted, ensure the vents inside the refrigerator and freezer are not blocked, clean the condenser coils to remove dust buildup, and make sure the door seals are tight. If the issue persists, it could indicate a malfunctioning thermostat, compressor, or a refrigerant leak, in which case it’s best to contact a technician for diagnosis and repair.

Understanding Common Causes Of Cooling Issues

To troubleshoot a Whirlpool side-by-side refrigerator not cooling, it’s essential to first understand the common causes of cooling issues. One common culprit is a buildup of dust and debris on the refrigerator’s condenser coils, hindering the cooling process. Another frequent issue is a malfunctioning evaporator fan, which can prevent air circulation throughout the unit, leading to inadequate cooling.

Additionally, a defective start relay or thermostat can also contribute to cooling problems in a Whirlpool refrigerator. It’s important to inspect these components to ensure they are functioning correctly. Furthermore, low refrigerant levels can cause the refrigerator to struggle to maintain cool temperatures. By familiarizing yourself with these common causes, you can effectively pinpoint the source of the cooling issue in your Whirlpool side-by-side refrigerator and take appropriate action to resolve it.

Checking The Temperature Settings

To start troubleshooting your Whirlpool side-by-side refrigerator not cooling, the first step is to check the temperature settings. Ensure that the thermostat is set to the recommended temperature settings for the refrigerator and freezer compartments. The recommended temperature for the refrigerator is around 37°F (3°C) and for the freezer is around 0°F (-18°C).

Next, verify that the temperature settings have not been accidentally changed or bumped. Sometimes, a slight adjustment can lead to improper cooling. Make sure the temperature controls are set correctly and have not been inadvertently altered by items placed inside the refrigerator or freezer.

If the temperature settings are correct and the refrigerator is still not cooling properly, it may indicate a more serious issue that requires further troubleshooting or professional repair. Moving on to the next steps in the troubleshooting guide will help identify and resolve the underlying problem causing the cooling issue in your Whirlpool side-by-side refrigerator.

Inspecting The Condenser Coils

To inspect the condenser coils, first unplug the refrigerator and locate the coils at the back or beneath the unit. Check for any visible dust, debris, or blockages that may be hindering proper heat dissipation. Use a vacuum cleaner or a coil cleaning brush to gently remove any buildup.

Next, ensure that the coils are not damaged or corroded. Any signs of damage could affect the refrigerator’s cooling ability. If the coils appear damaged, they may need to be replaced by a professional technician to restore optimal performance.

Regular maintenance of the condenser coils is essential for the refrigerator to operate efficiently. Make it a habit to clean the coils every 6 months to prevent issues with cooling. By keeping the coils clean and in good condition, you can ensure that your Whirlpool side-by-side refrigerator continues to cool effectively and efficiently.

Ensuring Proper Airflow In The Refrigerator

Proper airflow is crucial for maintaining the cooling efficiency of your Whirlpool side-by-side refrigerator. Check for any obstructions that may be blocking the vents inside the refrigerator compartment. Rearrange items to ensure that air can circulate freely throughout the refrigerator. Avoid over-packing the shelves and allow for some space between items to promote better airflow.

Additionally, inspect the evaporator fan located in the freezer compartment. Make sure the fan is running smoothly and not producing any unusual noises. A malfunctioning evaporator fan can disrupt the airflow, leading to inadequate cooling. Clean the fan blades and motor if necessary to enhance its performance. Regularly cleaning the condenser coils located at the back or underneath the fridge is also essential to maintain optimal airflow and cooling efficiency.

Lastly, ensure that the door seals are tight and free from any debris or food particles that could prevent a proper seal. A tight seal helps maintain the internal temperature of the refrigerator and prevents cold air from escaping. By addressing these airflow-related issues, you can help restore proper cooling functionality to your Whirlpool side-by-side refrigerator.

Examining The Evaporator Fan Motor

The evaporator fan motor plays a crucial role in circulating cold air throughout your Whirlpool side-by-side refrigerator. If the fan motor malfunctions, it can result in inadequate cooling performance. To examine the evaporator fan motor, start by locating it within the freezer compartment. You may need to remove the cover panel to access the fan motor.

Once you have located the evaporator fan motor, visually inspect it for any signs of damage or blockages. Check for any debris that may be obstructing the blades from spinning freely. Additionally, listen for any unusual noises coming from the fan motor when the refrigerator is running, as this could indicate a problem with the motor.

If you notice any issues with the evaporator fan motor, such as strange noises or lack of movement, it may need to be replaced. Contact a professional technician to diagnose the problem accurately and safely replace the fan motor if necessary. Keep in mind that a properly functioning evaporator fan motor is essential for optimal cooling performance in your Whirlpool side-by-side refrigerator.

Testing The Start Relay And Compressor

To test the start relay and compressor of your Whirlpool side-by-side refrigerator, start by unplugging the fridge and accessing the compressor at the back. Locate the start relay, which is connected to the compressor, and remove it carefully. Once removed, gently shake the relay – if it rattles, it may be faulty and in need of replacement.

Next, you can perform a continuity test on the start relay using a multimeter. Set the multimeter to the ohms setting and touch one probe to each terminal of the relay. If the multimeter shows high resistance or infinity, the relay is defective and should be replaced. Conversely, if there is low resistance indicated on the multimeter, the relay is functioning correctly.

After testing the start relay, proceed to test the compressor itself. You can do this by listening for a humming sound when the fridge is plugged back in. If the compressor does not hum or show any signs of activity, it may be malfunctioning and require professional repair or replacement.

Addressing Ice Build-Up Or Blockages

Addressing Ice Build-Up or Blockages:
Ice build-up or blockages are common reasons for a Whirlpool side-by-side refrigerator not cooling efficiently. Start by checking the evaporator coils in the freezer compartment. If ice is covering the coils, it can prevent proper airflow and cooling. Defrosting the coils by unplugging the refrigerator and letting them melt can resolve this issue.

Another common source of ice build-up is a blocked or clogged defrost drain. Locate the drain at the back of the freezer compartment and ensure it is clear of any debris or ice. If the drain is clogged, use a turkey baster or a small funnel to flush it with hot water until the blockage clears. This will prevent water from accumulating and turning into ice, which can affect the refrigerator’s cooling ability.

Regularly checking and addressing ice build-up or blockages in your Whirlpool side-by-side refrigerator can help maintain its optimal performance. By taking these simple steps, you can ensure proper airflow and cooling throughout the appliance, keeping your food fresh and safe.

Consulting A Professional Technician If Necessary

When all troubleshooting steps have been exhausted and your Whirlpool side-by-side refrigerator still isn’t cooling properly, it may be time to consult a professional technician. Refrigerator issues can sometimes be complex and require specialized knowledge to diagnose and repair accurately.

A professional technician will have the expertise to identify the root cause of the cooling problem and recommend the most effective solution. They can conduct a thorough assessment of your refrigerator, including checking the compressor, evaporator fan, condenser coils, and other key components that may be causing the cooling issue.

By seeking assistance from a qualified technician, you can ensure that any necessary repairs are carried out safely and efficiently, helping to extend the lifespan of your refrigerator and avoid potential hazards. Don’t hesitate to contact a technician if you’re unable to resolve the cooling problem on your own.


Why Is My Whirlpool Side-By-Side Refrigerator Not Cooling?

There are several possible reasons why your Whirlpool side-by-side refrigerator is not cooling properly. It could be due to a faulty compressor, a malfunctioning thermostat, a blocked air vent, or a problem with the condenser coils. Check to see if the refrigerator is running but not cooling, which could indicate a compressor issue. Additionally, ensure that the vents inside the refrigerator and freezer are not obstructed and that the condenser coils are clean and free of dust buildup. If troubleshooting these common issues does not resolve the problem, it might be best to contact a professional technician for further diagnosis and repair.

What Are Possible Causes For A Whirlpool Refrigerator Not Cooling Properly?

Possible causes for a Whirlpool refrigerator not cooling properly could include a malfunctioning condenser coil, a faulty evaporator fan motor, or a defective start relay. If the condenser coil is dirty or blocked, it may not be able to release heat effectively. A malfunctioning evaporator fan motor can prevent proper air circulation, leading to inadequate cooling. A defective start relay may result in the compressor not running efficiently, impacting the refrigerator’s cooling ability. Regular maintenance and timely repairs can help address these issues and ensure optimal performance of the refrigerator.

How Can I Troubleshoot A Whirlpool Side-By-Side Refrigerator That Is Not Cooling?

First, check the temperature settings on the refrigerator to ensure they are set correctly. Make sure the vents inside the refrigerator and freezer are not blocked by food items. Clean the condenser coils located either on the back or underneath the refrigerator to ensure proper airflow. If the coils are dirty, they can cause the refrigerator to not cool efficiently. If these steps do not resolve the issue, it may be a problem with the thermostat, compressor, or a refrigerant leak, in which case you may need to contact a professional technician for further diagnosis and repair.

What Are Some Diy Solutions To Fix A Whirlpool Refrigerator That Is Not Cooling?

To troubleshoot a Whirlpool refrigerator that is not cooling, start by cleaning the condenser coils located at the back or bottom of the unit. Dust and debris can block airflow, causing insufficient cooling. Additionally, check the gasket on the refrigerator door for any tears or damage that may be letting cold air escape. If the issue persists, try adjusting the temperature settings or ensuring the vents inside the refrigerator are not blocked by food items. If these DIY solutions do not work, it may be necessary to contact a professional appliance repair service for further assistance.

When Should I Consider Calling A Professional For Help With My Whirlpool Refrigerator Not Cooling?

If your Whirlpool refrigerator is not cooling properly, you should consider calling a professional if simple troubleshooting steps, like checking the temperature settings or cleaning the condenser coils, do not resolve the issue. Additionally, if you notice any unusual sounds, leaks, or frost buildup inside the fridge, it may indicate a more serious problem that requires professional attention. A trained technician will have the expertise to diagnose and repair complex issues with the cooling system to prevent further damage to your refrigerator.

Final Thoughts

In diagnosing and addressing a cooling issue with your Whirlpool side-by-side refrigerator, it is crucial to follow a systematic troubleshooting process to identify the root cause accurately. By referring to this comprehensive guide and performing the suggested steps meticulously, you can restore your refrigerator’s cooling functions effectively.

Remember that regular maintenance and timely repair actions are essential to keep your refrigerator in optimal working condition. Whether it’s checking the condenser coils or setting the correct temperature controls, proactive measures can prevent further cooling problems and extend the lifespan of your appliance. By staying proactive and informed, you can ensure that your Whirlpool refrigerator continues to provide reliable and efficient cooling performance for years to come.

Leave a Comment